Cyclo Drive Reducer

Cycloidal pinwheel reducer is normally a up-dated of brand-new type transmissing machine designed with K-H-V less tooth engagement and the cycloidal pin steering wheel clenching system, which are trusted in drive and reducing of textile and dying, foodstuff, mining and metallurgy, Oil and chemical Market, conveyors, project machinery etc and cranes. various fields.

1. Equipment is made from high power low carbon alloy steel by carburizing and quenching. The hardness of tooth area can reach HRC58-62. CNC grinding technology is followed for all with high precision, good contact functionality and gears
2. high transmission effectiveness: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light weight, long service existence and high bearing potential;
5. easy to disassemble, assemble and check.

Operation specifications and precautions
1.High modularization design: many equip with various engine or other power source conveniently.Same machine type may equip with many power motor. It really is easy to know the combination and
junction between every equipment type.
2.Transmission ratio: good division, wide scope. The combined equipment type may form very large transmission ratio, i.e. end result suprisingly low rotary speed.
3.Form of assembly: the positioning to be installed isn’t limited.
4.High strength, compact: the box body is made of substantial strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and great grinding process, which means bearing capacity of unitvolume is great.
5.Long life: Beneath the condition of correct type chosen (including choosing suitable operation parameters)normal procedure and maintenance, the life span of main elements of speed reducer (except sporting parts) shouldn’t be less than 20000 hours. The wearing parts include lubricating essential oil, essential oil seal and bearing.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is going to be low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High rate ratio and efficiency
Single stage transmission can reach to 1 1:87 of speed-straight down ratio and the efficiency is normally a lot more than 90%. If make use of multi-speed drive the speed-down ratio is definitely bigger.
2. Compact
Being adapted epicyclic transmitting basic principle, the input and result shaft are at same axis centre, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is bound at the minimum content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be obtained.The structure is simple, but it can realize high reduction ratio gadget.
2. Small gear clearance
The Get, which meshes with ordinary gears and has minimal backlash, is vital to the controller business.
3. High precision
Multiple teeth are involved concurrently, and there are several gears engaged with 180 degree symmetry. Subsequently, the influence of tooth pitch error and cumulative tooth pitch error on the rotation precision is relatively average, making the positioning precision and rotation accuracy reach a very high level.
4. Less parts, easy installation
The three basic components achieve a high deceleration ratio, plus they are all on the same axis, so the kit is easy to install and easy to shape.
5. Small in size and light in weight
Compared with the prior gear device, the quantity is 1/3, the weight is 1/2, but can obtain the same torque ability and reduction ratio, achieving small lightweight.
6 High torque capacity
Flexible wheel materials USES special steel with excessive fatigue strength.Not the same as ordinary transmission system, the quantity of teeth meshing accounts for about 30% of the total number of teeth. Additionally, it is in contact with the surface, to ensure that the pressure borne by each equipment is reduced and substantial torque ability can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the power loss caused by friction. Therefore, high decrease ratio may be accomplished while maintaining high efficiency, and miniaturization of driving motor could be realized.
8. Low noise
The apparatus meshing cycle velocity is low, the transmission motion force balance, which means procedure is quiet, and the vibration is quite small.
◆Large speed ratio and large efficiency single-stage transmission can achieve a deceleration ratio of 1 1:87, and the efficiency is more than 90%. If multi-stage transmission can be used, the deceleration ratio will be larger.
◆Because planetary transmission principle is adopted, the suggestions shaft and output shaft are on the same axis line, to ensure that the machine model can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is larger, and the mechanism of balancing machine parts will make the vibration and voice limited to a minimum.
◆Reliable use and very long service life as the main parts are made of substantial carbon chromium steel, large strength is obtained by quenching (HRC58-62), and rolling friction is utilized in a few transmission contacts, so the service life is lengthy.
Cycloid reducer is a cycloid needle teeth meshing planetary transmission principle drive models, is an ideal transmission has various advantages, versatile, and will be both negative and positive operation.

•Big ratio, and substantial efficiency Smooth operation,

• low noise The make use of reliable,

• long life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and contact with rolling friction, basically zero wear, durable.

• Compact structure,

• small size Because the use of a planetary transmission, the suggestions shaft and the end result shaft on a single axis, making the model to get the smallest possible size.

• Reasonable design, easy protection, and breakdown easily install,

• the least number of parts and also basic lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt essential double wall world pinion carrier, enhance the output strength and precision.

(2).Hoop clamp coupling have five connection ways suitable for different application environments.

(3).Size in this article PL/PF120(incorporating)precision and high power integral inner gear casing, processed in one station,which remove the cumulative error and assembling error of split type.Get rid of casting process;adopt incredibly hot of forging process, that may reduce the blank material defects.

(4).The meshing gear adopt shaving procedure after carburizing and quenching,which much easier to make gear surface area smooth and high accuracy,reduce the temperature rising caused by gear area gluing and friction.
This series worm-gear reducer was built after RV worm microreducer, which have a complete norm, wide speed for selection, and several mounting positions. Its functionality and mounting dime nsions conform the same types of foreign.
The blend of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, compact structure, radiate heat efficiently, low noise and beautiful shape.
Great sealing and adaptability.Its blend with T gear reducer and MB/MBN variator may meet all sorts of speed requirement.