Consisting of a stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is designed to operate materials dealing with products. The reducing movement is achived through the solenoid valve with the lowering velocity controlled by an adjustable needle valve. The left and suitable functions are equipped by using a dual pilot operated check valve and cross-over relief valves.
Remark: Please check with our income engineer to the different pump displacement, motor electrical power or tank capacity.
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic parts concerned before installation of the power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which ought to also be clean and totally free of impurities.N46 hydraulic oil is proposed.
4. This energy unit must be mounted horizontal.
5. Check the oil degree during the tank just after the 1st get started on the electrical power unit.
six. Oil altering is needed immediately after the initial a hundred operation hrs, afterwards after each 3000 hrs.
SNOW PLOW Electrical power UNIT